Leak Sealers Inc. is an industry leader in high-pressure and high-temperature industrial products and services. Leak Sealers specializes in the areas of on-stream leak sealing, bolting and torqueing, hot taps, industrial coatings, valve repairs and field machining.
Leak sealing
On-stream leak sealing is a very volatile industry in which Leak Sealers prevails. Leak Sealers makes a conscious effort to stay atop this volatile industry. The main reason why Leak Sealers is able to stay on top in the on-stream leak sealing industry is because of its industry-leading emergency response time. Leak Sealers guarantees 99 percent of every emergency job is delivered back to the facility in a 24-hour time period (depending on the magnitude of the enclosure). This timeframe starts from the time the leaking apparatus is measured by a Leak Sealers technical crew. Another commitment from Leak Sealers is that each routine job be delivered in a 48-hour timeframe. Each one of these commitments helps assure customers Leak Sealers personnel is 100-percent dedicated to reducing response time. And even as each job is completed in a time-efficient manner, it is also completed in the safest manner possible.
Why is Leak Sealers on top of the on-stream leak sealing industry when it comes to response time?
• Emergency response teams ready to respond to your facilities’ needs at any time of the day or night.
• On-staff engineers ready to design custom enclosures.
• Refined, mathematical leak-sealing software produced by the on-staff engineering department.
• Customized three-dimensional and two-dimensional technical software, which aids in the efficiency and precision of custom enclosures’ design.
• An in-house machine shop ready to fabricate any custom enclosure designed by the engineering staff.
• A QA/QC program that allows Leak Sealers’ and Phoenix Precision Machine’s employees to check critical areas of enclosures throughout their fabrication to ensure the enclosures will fit appropriately when installed at each and every facility.
Bolting, torqueing
Bolting and torqueing are services performed efficiently by Leak Sealers and offered to each one of its customers. Leak Sealers’ emergency response teams are well trained in the correct procedure for each of your facilities’ bolting and torqueing needs. Emergency response teams receive extensive training in the field of bolting and torqueing. Each emergency response team member is equipped with the knowledge to complete each job in the most time- and cost-efficient manner.
There is no flange too small or too large for Leak Sealers personnel. Leak Sealers can adjust to any of your facilities’ needs. With full-service bolting and torqueing trailers, Leak Sealers can complete each task in a safe, time- and cost-efficient manner. All of the bolting and torqueing equipment supplied in the trailers is purchased from HYTORC and serviced on a regular basis. This proper maintenance of the equipment is what allows Leak Sealers to precisely bolt and torque to any desirable value. These full-service trailers, along with the correct training of the Leak Sealers emergency response teams, are what enable Leak Sealers to take care of every bolting and torqueing need your facility might have.
Leak Sealers’ top-of-the-line bolting and torqueing service consists of but is not limited to:
• A technical support team to work directly with engineering and inspections personnel while at your facility.
• Full-service bolting and torqueing trailers.
• Bolting and torqueing procedure manuals available on all service vehicles if any questions arise and the proper documentation is requested.
• Any hydraulic pump and wrench applications.
• Any uniform bolt-loading applications.
• Selection of the best tightening method for the torqueing.
• Any flanged joint application.
• Any bolt breakout.
• Any special application when removing studs.
• The knowledge and experience of a full-service emergency response team.
Also, Leak Sealers emergency response teams can apply any particular lubricant as applicable to each job.
Hot tapping and stoppling
Hot tapping and stoppling are specialty services offered by Leak Sealers to its customers. Leak Sealers has new, state-of-the-art equipment with the capability to perform hot tapping jobs from 0.5-20 inches. Leak Sealers can safely hot tap at up to 1,380 psi and at temperatures between -20 degrees F and 700 degrees F. These minimum and maximum values of temperature allow Leak Sealers to handle most any hot tapping and stoppling application need. Leak Sealers’ knowledgeable crews are what enable this industrial leader to stay ahead of the competition.
Industrial coatings
The industrial coating service at Leak Sealers deals directly with the improvement of the structural integrity of worn and aged pipe in your facility. Leak Sealers is a certified DiamondWrap® distributor and installer. DiamondWrap products, along with Leak Sealers’ emergency response teams, have proven time and again they work and work well. Its technicians will prepare the piping surface to the engineered design specifications for best adhesion.
Valve repair
What kinds of valves does Leak Sealers repair?
• Ball valves
• Gate valves
• Globe valves
• Plug valves
• Check valves
How does Leak Sealers repair them? Leak Sealers has a very extensive and elaborate valve repair program. Response team members are able to service any valve in two different scenarios. The first scenario is to repair the valve while it is still in service; this is preferred by most operating facilities. The other scenario, which is also very effective, is to have the valve removed for repair at a service facility when it is not in service, such as during a shutdown or turnaround. Both scenarios have helped Leak Sealers prevail and emerge at the forefront of valve repair service in the industry.
There are many different techniques with which a response team member can solve valve repair issues while the valve is still in service, with the first being to drill and inject a sealant into the valve packing area. Another technique utilized by Leak Sealers is to gag and change the packing bolts all while the valve is still in service. Techniques such as hand-packing the valve, resurfacing the flange faces, and breaking out and re-torqueing the flanges all require the valve to be out of service.
All of these options are desirable in the industry. Leak Sealers’ emergency response teams have many years of experience in performing each one of these tasks.
Field machining
What kind of machining work does Leak Sealers perform?
• Pipe beveling and cutting
• Flange facing (raised face, flat face, self-reinforced, ring-type joints or tongue-and-groove) up to 120 inches
• Re-machining any sealing surface on heat exchangers, vessels and reactors up to 120 inches
• Repairing existing or EPC pump bases and compressor bases
• Designing and manufacturing any size of split tee
• Isolation plugging and weld testing
The field machining department at Leak Sealers is a very versatile and experienced department. This department deals directly with the machining of flange faces, exchanger heads and any type of pump base. Leak Sealers’ field machining crews have completed many tasks successfully when dealing in these critical areas.
Note to customers
At Leak Sealers, workers know the company would not be where it is today without its loyal customers’ continued support. They strive to ensure all customers are fully pleased with the work they perform, and they will work with your team if there is anything they can do to better serve you. Thank you for choosing Leak Sealers for all of your specialty leak sealing needs.
For more information, visit www.leaksealers.com or call (888) 551-7325.